Net.Hunter

Tap, Filter & Capture

Net.Hunter can act as a tap and filter, data is passed through the unit unaltered and any data that matches the filters can be stored on the internal SDD, or sent to the mirroring output ports to be sent to another tool. In filter mode It is also possible to connect Net.Hunter to an external tap or mirror port, and any data that matches the filters can be stored or sent to the mirroring output ports. It is also possible to aggregate traffic from the input ports and send this data to another tool.

‍

Hardware Filters

16 Hardware filters on each port can be applied to all incoming traffic, only data that matches the filters is captured or passed to the output ports. Filters include Ethernet MAC addresses, Ethertype, VLAN, IP addresses, Protocol type, DCSP, TCP/UDP port, and customer defined masks and pattern match.

‍

Network Neutral

Net.Hunter is undetectable on the circuit under test with no MAC or IP address making it ideal for security applications. Operating at line speed with no delay or loss of traffic Net.Hunter is the ideal tool for network troubleshooting, forensics and security where capturing off network data is paramount.

‍

View Captured Data on Wireshark

Using a standard Web Browser users can access captured data stored on the internal SSD and download the file to a PC or MAC for analysis in Wireshark or another protocol analysis tool. Captured data is stored in PCAPNG format providing the widest capability with analysis tools. Disk capture options allow for capture to be stopped when the internal disk is full or to wrap the capture. A wrap around capture never deletes any existing data stored on the disk but older frames within the current capture may be overwritten.

‍

‍

‍

‍