KE801 Copper & Fibre Cable Tracer Kit

EasyTest800 / Probe410 can be used with all types of cables such as power cables, telephone cables, bell wires, all classes of data cables, coax cable, wire harnesses in motor vehicles and many others. The EasyTest800 generates six different search signal frequencies, three continuous tones and three alternating tones. Users select different tones by pressing keys on the unit, status is displayed with LEDs. For added convenience a Coax F-Type connector has been added and a Visual Fault Locator light source with universal 2.5mm ferrule has been integrated.

‍

‍

Each search signal can be fed on to live telecommunications lines. The device is protected up to 500 volts AC. All connection cables are provided with an effective strain relief. The strong alligator clips are isolated while the individual RJ11 & RJ45 connectors have a strain relief. A special DATA test mode will cause the Port Lamp to Blink when connected to active network devices.

‍

Each search signal can be fed on to live telecommunications lines. The device is protected up to 500 volts AC. All connection cables are provided with an effective strain relief. The strong alligator clips are isolated while the individual RJ11 & RJ45 connectors have a strain relief. A special DATA test mode will cause the Port Lamp to Blink when connected to active network devices.

The Probe410 has a green signal LED with filter function, this LED will only light up when used with the 1 kHz signal of the EasyTest. This makes locating cables easy in noisy environments or in distribution boxes with interfering signals such as 50 Hz. The built-in white LED provides an illumination capability allowing users to find cables and identify wire colours in dark environments. The rugged, high-resistive test tip constructed out of non-conductive solid carbon fibre is easily replaceable.

‍

The EasyTest800 contains an high power Fibre Optic Visual Fault Locator. It is easy to use and provides a universal jack for most fibre connectors with a 2.5 mm Ferrule. It can be used to check both singlemode and multimode optical fibres and other fibre optic components for faults. In the modulated LaserMode, audible frequency from 270 Hz and 1 kHz in either Continuous Wave or Pulse Mode are selectable. Using a power meter with a demodulation feature on the far end to detect the modulated light, the used frequency will be visible in the display. The Kit comes with a solid belt pouch with enough space for EasyTest / PROBE410 as well as the earpiece (option) and the user manual.