USB-Testbook is a comprehensive SIP Trunk, VoIP service, and Enterprise VoIP pre-deployment tester. Designed specifically for those tasked with installing and maintaining VoIP services and equipment, USB-Testbook is an easy to use but powerful test tool
Able to emulate both customers equipment and the VoIP network itself, USB-Testbook can be used to test service providers VoIP services and SIP Trunks, VoIP equipment such as PABX's and VoIP routers, and internal network infrastructure for VoIP readiness.
In standard operation mode USB-Testbook can make make up to 30 simultaneous VoIP calls with media whilst reporting in real time the call quality on each call in progress. In mass call mode this capability is extended to 200 simultaneous calls.
With a T.38/G.711 Fax emulation capability to test Fax over IP capability USB-Testbook is the ultimate test tool for VoIP engineers and consultants.
Test Network VoIP Call Capability
USB-Testbook has the ability to make real SIP based VoIP calls to any destination including Fixed Line Phones (POTS), Mobiles, International Numbers and of course other VoIP devices.
How often do you test a new SIP trunk or VoIP service and find that the maximum call capacity is configured incorrectly or that call routes to certain destinations are not possible. USB-Testbook.Lite allows users to check call capacity of trunks and networks as well as test call routes using a number of different calls modes.
A key issue when deploying VoIP especially when replacing traditional analogue and TDM voice services is the call quality, are users experiencing good voice quality when making VoIP calls.
USB-Testbook provides a real-time call quality (MOS) indication whilst test calls are in progress. Using easy to understand colour indicators USB-Testbook shows the call quality for each call in progress allowing users to determine if the underlying network or service is able to deliver the required quality of service.
Users can adjust the ToS (Type of Service) and CoS (Class of Service) for both the SIP signalling and RTP (Media) in order to determine network performance and to check if QoS settings are in place and effective.
Enterprise Pre-Deployment Testing
Ensuring that your internal enterprise network is capable and ready for VoIP deployment is as important as testing eternal SIP trunks and VoIP service connections. Using USB-Testbook along with USB.Testbook loop provides a cost effective and powerful solution for VoIP pre-deployment testing. USB-Testbook uses real SIP VoIP calls with media to carry out it's tests rather than synthetic UDP packets. This allows you to stress you network with real VoIP conditions ensuring that your network and equipment is configured correctly and delivering the required QoS.
Testing across your enterprise network is great to ensure network VoiP readiness, but often calls are to external numbers or remote workers and offices where calls have to transverse an external network.
With USB-Testbook using real SIP signalling and media it can also make tests externally through SIP trunks and service providers VoIP networks to ensure call completion and call quality.
Automatically Detect VoIP Problems
When deploying VoIP services behind routers especially those with NAT, ALG and firewalls, there can be issues such as no voice or one-way voice even if a VoIP phone indicates that the call is connected.
USB-Testbook can help isolate VoIP issues by automatically reporting on a number of identified issues whilst making test calls. For example if during a call USB-Testbook detects that RTP (Voice) has been lost in either the forward or reverse direction it alerts the user to the issues both in the graphical user interface as well as the system log.
This capability help users to identify issues that are otherwise difficult and time consuming to find. Once a problem such as one-way RTP is identified USB-Testbook can then by used to provide a consistent and repetitive method of testing whilst changes are made to network and equipment settings required to address the issue.
Document VoIP Network Performance
Testing Trunks and Networks for VoIP capability and performance is all well and good but how do you share with others those test results and prove that testing has been successful.
With automatic PDF test report generation, USB-Testbook.Lite generates and saves detailed PDF reports in the background each time you run a test. Two test reports are generated, one graphical detailing call completion information and call quality statistics, the other providing a copy of the system log displayed in the test workspace detailing all call information and other detected events.
The PDF reports can be customised by loading your own Logo/Header and details such as site details and engineers name can be added to the reports, Ideal for giving to customers or keeping for internal records.
Identify Issues by Emulating VoIP Entities
Identifying issues in any network can be difficult especially when equipment and services are provided by different suppliers. When problems happen, finger pointing often occurs with different vendors blaming the other.
With USB-Testbook you can easily isolate VoIP issues by replacing different VoIP entities in the network. In PBX emulation mode you can emulate a VoIP PBX or similar checking that SIP trunks and VoIP networks and infrastructure are operating correctly. In Network (ITSP) emulation mode you can emulate the VoIP network and infrastructure allowing users to test VoIP PBX's and other VoIP CPE to ensure for correct operation and configuration. Network Emulation mode is often used by users to pre-stage and test VoiP equipment in the lab before it is delivered and installed on customers sites.
Graphical User Interface shows status of calls in real time helping to visualise test progress and VoIP call problems
USB.Testbook with USB-Testbook.Loop can test your enterprise network for VoiP readiness as well as testing external SIP trunks and VoIP services
Real time call quality (MOS) is displayed for each call in progress using colour coded indicators
USB-Testbook can emulate VoIP CPE (PABX) to test SIP Trunks & VoIP Networks, and can also emulate a VoIP Network to test VoIP equipment
Intelligent call monitoring during test calls automatically detects and indicates issues such as one-way RTP.
Detailed PDF test reports are automatically generated in the background each time a test is run.
Cherwell Innovation Centre
77 Heyford Park