The KE301 Classic Cable & Line Tracer Kit allows technicians to find any kind of cable, wires and pairs without contact in the shortest possible time. The main units also indicates voltages on the cable, recognises the polarity and can be used as a continuity tester.
EesyTest300 / Probe310 can be used with all types of cables such as power cables, telephone cables, bell wires, all classes of data cables, coax cable, wire harnesses in motor vehicles and many others. The EasyTest300 generates six different search signal frequencies, three continuous tones and three alternating tones. Users select different tones by pressing keys on the unit, status is displayed with LEDs.
Each search signal can be fed on to live telecommunications lines. The device is protected up to 120 volts AC. All connection cables are provided with an effective strain relief. The strong alligator clips are isolated while the special RJ11 connector has a strain relief and can be plugged in RJ45 data sockets without damaging the contact thanks to additional contact guides for PIN 1 and 8.
The battery compartment is separated from the electronics and equipped with a captive screw. The signal receiver Probe310 detects the search signal without any contact to the wire under test up to a distance of 0.6 meter. This allows for the precise location of the cable path in thick bundles of cables, in walls or flush-mounted, and pair of wires in the distribution or in the bundle.
The Probe310 has a green signal LED with filter function, this LED will only light up when used with the 1 kHz signal of the EasyTest. This makes locating cables easy in noisy environments or in distribution boxes with interfering signals such as 50 Hz. The built-in white LED provides an illumination capability allowing users to find cables and identify wire colours in dark environments. The rugged, high-resistive test tip constructed out of non-conductive solid carbon fiber is easily replaceable.
Cherwell Innovation Centre
77 Heyford Park